 |
Q485 Dial
Indicator Kit (for
ultra fine adjustment)
Q485 2” DIAL
INDICATOR KIT for fine adjustment of “Q” pump flow rate settings. A
convenient dial indicator with direct reading count hands for precise
flow rate setting. Responds to slightest turn of the “Q” pump adjustment
knob. One revolution of primary pointer equals 10% of maximum flow rate
(each increment on dial represents 1/1000 of maximum flow rate.)
Secondary dial indicates each 10%. Easily attaches to all “Q” pump
bases. Can be ordered with pump or separately.
|
|
Top of
Page |
Tubing Adapters for Plastic
Case Pump Heads
The integrally
moulded port fittings on the standard FMI Type K pump heads accept all
1/4” OD tubing. For other tubing arrangements, special port adapters are
required.
|
#R412-0K Adaptor for
1/8” ID Tubes
#R412-1K Adaptor for 1/4” ID Tubes
#R412-2K Adaptor for 3/8” ID Tubes
#R412-5K Adaptor for 1/4-28 ferrule fittings
#H476-K Adaptor for 1/8” OD Tubes |
|
 |
Q661
Small Bore Tubing Kit
Designed for all LF Pump
Heads and to complement the FMI R479, R412-5K, and PD-60-LF, the Small
Bore Tubing Kit has a flangeless design that eliminates the need for
special tools and assures leak-free, zero dead volume connections. They
provide Tefzel and Teflon wetted surfaces.
Kit Q661 - 1/16” &
1/8”
Contains both Q661A and Q661B |
Kit Q661A - 1/16”
10’ - 1/16”O.D. x 1/32” ID TFE Tubing
10 - Delrin Nuts (Black)
10 - Tefzel Ferrules (Blue) |
| |
|
Kit Q661B - 1/8”
10’ - 1/8”O.D. x 1/16” ID TFE Tubing
10 - Delrin Nuts (Green)
10 - Tefzel Ferrules (Yellow) |
Kit Q661C - 1/8”
10’ - 1/8”O.D. x 1/16” ID TFE Tubing
10 - Teflon Nuts (White)
10 - Tefzel Ferrules (Yellow) |
|
|
Top of
Page |
RH/Q
This is a complete
adaptation system that permits use of an RH miniature pump head on any Q
drive module. Once the RH pump head is fitted (3 screws) to the kit
parts, it can be slipped into place on the drive module in seconds
without tools. To remove it, simply loosen the two thumb nuts of the
motor base and slip it off.
|
 |
R479 Low
Flow Isolation Kit
Kit #R479 is a
Teflon adapter for FMI Stainless Steel (S) pump heads that are used in
low flow (below 50 ml/min) applications where minimum system dead volume
and maximum chemical inertness is required.
The kit provides 1/4-28 internal machine threads that are used with low
flow tube fittings for small bore tubing of 1/8” OD or less, such as
Kits Q661. Particularly useful in chromatography applications and when
using Pulse Dampener PD-60-LF (shown below).
|
KIT # R479
consisting of four ferrules, two adapters & assembly / removal
tools
KIT # R478A Consists
of ten spare ferrules |
|
 |
P56C
Adapter Kit
Use the FMI P56C Adapter Kit
for easy hook-up to your NEMA 56C Face Foot Mount motor. Specify P56C
Shipping Weight: 4 lb (1.80 kg)
|
|
Top of
Page |
Low Flow Barb Adapters
For 1/16” Tubing
Threaded 1/4-28 UNF Fitting
to Kynar Barb Bottom sealing, rotating adapters consisting of a white
nylon 1/4-28 fitting with 5/16" hex nut and Kynar (fluid path) insert
barb.
|
Part # 110874A Pkg.
of 10 |
|
 |
Low Flow Barb Adapters
For 1/8” Tubing
Threaded 1/4-28 UNF Fitting
to Kynar Barb Bottom sealing, rotating adapters consisting of a white
nylon 1/4-28 fitting with 5/16" hex nut and Kynar (fluid path) insert
barb.
|
Part # 110873A Pkg.
of 10 |
|
 |
FMI Pulse Dampener PD-60-LF
Low Flow Steady Flow
Accessory
The FMI Pulse Dampener
PD-60-LF is designed to effectively suppress approximately 90% of the
pulse magnitude generated by piston type metering pumps operating at
flow rates up to 50 ml/min and stroke rates up to 150 per minute against
head pressures of 10 to 65 psig. It features low internal volume,
isolated pressure gauge, corrosion resistant wetted parts of type 316
stainless steel and TFE, flow-through (self-purging) design, excellent
reduction of base line drift and noise in feeding low-pressure liquid
chromatography systems, all in a small (2.7” x 5” x 6” high),
lightweight (1.6 lbs net) package arranged to accept standard 1/4-28
tubing accessories.
|
 |
PH-HF In-Line Pulse
Suppressor
For High Flow
Applications
NEW IN-LINE PULSE SUPPRESSOR
for high flow systems of 50 ml/min or greater and stroke rates higher
than 150 spm against head pressures of 10 to 65 psig. Unique
encapsulated polyethylene bellows design that eliminates tubing
vibrations and cavitation problems. Easy to connect 1/4” compression
fittings. Best results achieved when installed on both suction and
discharge
|
|
Top of
Page
|
Corrugated Teflon
Tubing Pulse
Suppressor
For High Flow
Applications
Highly flexible no kink
tubing for high flow, 50 ml/min or greater, high pressure (100 psig)
applications. Eliminates cavitation and mechanical stress. Best results
when used on both suction and discharge lines. Slips over 3/8” barbed
fitting.
3/8” I.D. x 12” long
|
