|
|
|
|
|
2
Part Volumetric Meter Mix Dispensing Systems
|
SeeFlo® 387
|
 |
Rugged and simple to
operate, the See-Flo® 387 is a bench
top, air powered meter / mix system for dispensing precise measured 'shots' of
two component low viscosity materials.
This machine is ideal for production
potting, encapsulating, bonding, or lab type applications.
The
AirDraulic™ drive delivers a smooth, pulse free
mixed material flow rate. The volumetric shot size is controlled by the stroke
length of the positive displacement metering pistons.
Its mechanical HARD STOP
ensures extremely accurate shot size repeatability.
Click here for further
information |
|
Top of
Page |
SeeFlo® 7
|
 |
Adjustable ratio,
two component meter / mix / dispense system. Recommended for dispensing low to
medium viscosity materials. Double acting metering cylinders allow continuous,
on demand flow or metered 'volumetric shots' of mixed materials with no reload
delay between parts.
An immense variety of
industrial products is processed with this production proven machine. Air
powered positive displacement meter pumps with 'hard stop' shot controls and
disposable mixers has given the
See-Flo® 7 a legendary reputation for
durability and versatility in a broad range of applications including potting,
encapsulating, and casting.
Either floor or cart mounted, the system is
available with a broad selection of controls and material supply options.
Click here for further
information |
|
Top of
Page |
|
SeeFlo® 582
|
 |
This air
powered, positive displacement, double acting meter, mix and dispense system is
well suited for dispensing metered 'shots' or operator controlled quantities of
low to medium viscosity material through a
No-Flush™ disposable static mixer.
Floor, cart,
or pail top mounted, the See-Flo® 582
is modular and adapted to a wide ranged of production applications.
Similar to
the standard system, the See-Flo® 582-HV
is configured for dispensing higher viscosity adhesives, sealants, and
moulding materials.
Click here for further
information |
|
Top of
Page |
SeeFlo® 690
|
 |
When the application calls for
applying precise beads or shots of difficult to handle abrasive or high
viscosity materials, the
See-Flo® 690 is the machine of choice.
Features include carbide valving and hardened piston rods that never touch
(scrub) the cylinder walls. It is powered by an
AirDraulic™ cylinder for precise flow
control throughout the dispense cycle.
Low cost, disposable
No-Flush™ mixer nozzles and
Snuf-Bak™ dispense valves can be
remote mounted over a conveyor for fully automated operations. "Hard Stop" shot
size adjustments are simple and dependable.
Click here for further
information |
|
Top of
Page |
MicroMeter® 2
|
 |
This is a complete meter / mix system for dispensing very small
micro-shots (0.02 - 3.52cc's) or
micro-beads of two component adhesives or sealants
at the point of application.
Lightweight, compact, and readily fixtured, the
positive displacement MicroMeter® 2
dispenses exactly metered and mixed materials on demand - shot size is set by a
micrometer adjustment.
Click here for further
information |
|
Top of
Page |
Program-A-Shot™
System
|
 |
The
Program-A-Shot™ System
is an electronic control system that will allow you to
'program'
the metering system to
dispense up to 30 different
precise volumetric shots of mixed
material controlled via a DTAM control panel.
This option can be used with virtually any
SeeFlo®
Meter Mix Dispense systems as shown above.
Click here for further information |
|
Top of
Page |
Program-A-Shot™ 997
|
 |
The
Program-A-Shot™ 997 is a solid state controlled, electrically
driven, positive displacement metering unit for potting and encapsulation
applications.
Its independent servo-motors and
ball / screw drives power the free floating metering rods
giving an
independently variable ratio for the
both A & B materials.
The complete
SPC
control and feedback allows you to establish and set parameters to insure
operation accuracy and consistency.
For high volume automated dispensing of
precisely controlled shot sizes of a two component silicone, epoxy, or urethane
encapsulant, the
Program-A-Shot™ 997 system
offers the ideal
solution.
Click here for further
information |
|
Top of
Page |
|
|
|
