|
Variable Ratio
The metered ratio may be changed by
simply repositioning, and locking, one of the metering pumps. The ratio may be
set at any position in the range and remains constant throughout the dispense
cycle. In-line ratio check gauges allow the user to monitor the system's
metering operation and also serve as a maintenance aid for fast fault
diagnosis.
Ratio Range
A
SeeFlo® 7's
ratio range depends on the meter pumps
selected. Models are available to proportion ratios from 1:1 up to 56:1 parts
by volume.
Metering and Dispensing
Positive displacement, double acting
pumps precisely proportion the A & B material components. Mixed material is
dispensed continuously without reload delays and virtually pulse free.
Dispensing is via an automatic air operated or manual dispense valve available
in either a No-Drip® or
Snuf-Bak® format to prevent material dripping or
stringing after shut off.
Solvent Not Needed
The
No-Flush™ disposable plastic mixer nozzle
thoroughly blends the two resin materials while eliminating the need to solvent
flush the mixer.
Rugged and Simple to Operate
Dispensing air free shots of
thoroughly mixed material is accomplished with ease is actuated either by a
foot pedal, fixture mounted proximity switch / line controller or by a manual
trigger on the dispense valve handle.
Material Supply
(Not shown in photograph); select
from supply / pressurised tanks in varying sizes with or without agitators;
transfer pumps.
Optional Components
|
Electronic controls (including
PLC's) |
Stainless steel
components |
|
Dynamic mixers |
Heated material hoses |
|
Resin or solvent purge / Auto Purge / Purge
Timer |
Multiple dispense guns |
|
Shot counter |
Material supply tanks (numerous
options) |
|
Program-A-Shot Package |
Material supply pumps (numerous
options) |
|
