No-Drip® Hi Volume Fluid Control Valve Range

Model 2600-060 Quick-Service™ fluid valve is designed for precise on-off flow control of medium- to high-viscosity fluid materials. It can also be used as a dispense valve for viscous materials such as acrylic, epoxy, PVC, silicone, urethane and lubricants.

With its tungsten-carbide ball-end needle and carbide seat, Model 2600-060 is built for long service life. Replacing the needle, piston and all the seals in the valve can be accomplished in less than two minutes. The valve’s one-piece pre-assembled cartridge is the only part required and the valve does not have to be removed to perform service.

The pneumatically actuated 2600-060 No-Drip Valve is rated for 5,000 PSI. Its rugged construction also includes an anti-abrasive, hard-coated needle shaft and wear-resistant fluid seals to maximize valve life.

The valve body has three 3/8 NPTF inlet fluid ports for easy connection and a 3/8 NPTF outlet port for high-flow requirements. Precision dowel and screw holes allow easy, accurate in-line or surface mounting. Material is delivered to the No-Drip valve by either a metering assembly or under regulated pressure from supply pumps available from Sealant Equipment & Engineering, Inc.
 

• Quick-Service ™ cartridge design
   
• 3/8" NPTF inlet/outlet material ports
   
• 5,000 psi maximum inlet pressure
   
• Double-acting Divorced air/material design
   
• Long-life Carbide Ball Needle and Seat
   
• Abrasion Resistant
   
• Screw holes, dowel holes for surface mounting

For further information, please click here

Top of Page

This No-Drip®, high volume, high pressure, on/off flow control valve for use with single component adhesives, sealants, grease, or other flowable materials.  The valve's No-Drip® shut-off action ensures a quick, positive stop of material flow when the valve is closed without any residual material dripping.

This double air operated valve (1/4" NPTF air to open / air to close) is available in numerous configurations.  Features include elasto-plastic packings, seals in a variety of materials (molythane, polymyte, nitroxile, ultrathane, fluoromyte, EPR and Teflon), carbide ball & seat, stainless steel wetted parts, and stroke adjustment.
 

• Large variety of seal options available
   
• Carbide ball & hardened seat for low wear
   
• Weight: 2.7kg
   
• Dimensions: 108mm dia. x 150mm long
   
• Maximum fluid pressure: 5,500 psi (379 bar)
   
• 1/2" NPTF material inlet and outlet port 
   
• Divorced fluid section prevents material entering air circuit
   
• Air-actuated open / close (spring close option available)
   
• Valve service requires no special tools
   
• Mounting flats and drill thrus for easy mounting

For further information, please click here

Top of Page

This No-Drip®, high volume, high pressure, on/off flow control valve for use with single component adhesives, sealants, grease, or other flowable materials.  The valve's No-Drip® shut-off action ensures a quick, positive stop of material flow when the valve is closed without any residual material dripping.

This double air operated valve (1/4" NPTF air to open / air to close) is available in numerous configurations.  Features include elasto-plastic packings, seals in a variety of materials (molythane, polymyte, nitroxile, ultrathane, fluoromyte, EPR and Teflon), carbide ball & seat, stainless steel wetted parts, and stroke adjustment.
 

Top of Page

This No-Drip®, high volume, high pressure, on/off flow control valve for use with single component adhesives, sealants, grease, or other flowable materials.  The valve's No-Drip® shut-off action ensures a quick, positive stop of material flow when the valve is closed without any residual material dripping.

This double air operated valve (1/4" NPTF air to open / air to close) is available in numerous configurations.  Features include elasto-plastic packings, seals in a variety of materials (molythane, polymyte, nitroxile, ultrathane, fluoromyte, EPR and Teflon), carbide ball & seat, stainless steel wetted parts, and stroke adjustment.

Top of Page

This No-Drip®, high volume, high pressure, on/off flow control valve for use with single component adhesives, sealants, grease, or other flowable materials.  The valve's No-Drip® shut-off action ensures a quick, positive stop of material flow when the valve is closed without any residual material dripping.  This valve has a double stacked piston design to enable fast shut-off at high pressures without having a large diameter single piston.

This double air operated valve (1/4" NPTF air to open / air to close) is available in numerous configurations.  Features include elasto-plastic packings, seals in a variety of materials (molythane, polymyte, nitroxile, ultrathane, fluoromyte, EPR and Teflon), carbide ball & seat, stainless steel wetted parts, and stroke adjustment.

Top of Page